iPowerUS 9V ión Li, batería recargable

18,80  (22,75  Imp. Inc.)

“baterías recargables polímero Li+, 500 y 520 mAh”“Rechargeable Li-Ion Polymer battery, 500 & 520 mAh”“baterias recarregáveis 9 V, 500 e 520 mAh “

SKU: IP-BAT520 Categoría: Etiquetas: ,

Descripción

· tensión nominal: 8.4 V
· tensión corte descarga: 6.4 V
· proteccion exceso intensidad y tensión vía circuito emebebido
· sin efecto memoria, capacidad de retención >80% tras 100 ciclos de carga

Datos Técnicos

Battteries fully charged will measure 8.0 to 8.4 V.

To measure the battery properly, a load must be applied. Many high impedance voltmeters do not activate the battery.

When in cut-off mode the battery may measure zero to open or partially open circuit voltage. If in cut-off, the charger should activate the battery. This may take a few seconds or minutes, depending on the cut off conditions.

If a drained battery shows a green LED instead of a red LED, take out the battery, wait 10 seconds then re-insert the battery, it should work fine.

If the battery is inserted reversed polarity, backwards, the channel light will flash RED.

This product carries a 3 months warranty from date of purchase against defects in materials and workmanship. This warranty does not cover damage resulting from accidents, misuse, short circuit, and dose not charges with specified chargers. If the product should become defective within warranty period and under the above mentioned conditions, please return it to the store you originally purchased it with proof of purchase for repair or replacement free of charge.

Preguntas Frecuentes

Description

· nominal voltage: 8.4 V
· discharge cut-off voltage: 6.4 V
· built-in protection circuit to control over-current and voltage
· no memory effect, capacity retention >80% after 100 charge cycles

Technical Specifications

Battteries fully charged will measure 8.0 to 8.4 V.

To measure the battery properly, a load must be applied. Many high impedance voltmeters do not activate the battery.

When in cut-off mode the battery may measure zero to open or partially open circuit voltage. If in cut-off, the charger should activate the battery. This may take a few seconds or minutes, depending on the cut off conditions.

If a drained battery shows a green LED instead of a red LED, take out the battery, wait 10 seconds then re-insert the battery, it should work fine.

If the battery is inserted reversed polarity, backwards, the channel light will flash RED.

FAQ

Descrição

· tensão nominal: 8.4 V
· tensão corte de descarga : 6.4 V
· circuito de proteção embutido para controlar o excesso de corrente e tensão
· sem efeito de memória, capacidade de retenção >80% depois de 100 ciclos de carga

Especificações Técnicas

Preguntas Frecuentes

Información adicional

Marca

Valoraciones

No hay valoraciones aún.

Solo los usuarios registrados que hayan comprado este producto pueden hacer una valoración.

Free Divi WordPress Theme, Find new Free Android Games at dlandroid24.com