CU-44X MkIICU-44X MkIICU-44X MkII

1.795,00  (2.171,95  Imp. Inc.)

CU-44X MkII
. high transient response
. transformerless 2 way capsule microphone“CU-44X MkII. high transient response . transformerless 2 way capsule microphone”“CU-44X MkII. high transient response . transformerless 2 way capsule microphone”

SKU: SK-CU-44X MkII Categoría: Etiquetas: ,

Descripción

The CU-44X MkII has a specially-designed 2-way capsule, one for the bass and one for the high frequencies. This unique design with dual titanium diaphragms is a meticulously engineered microphone which produces a completely transparent and high-resolution sound suitable for today’s advanced high sampling digital recordings. The CU-44X MkII also features a unique capsule mounting scheme to ensure phase coherency between the two capsules. The titanium membranes of the CU-44X MkII are immune to the effects of humidity and temperature change, resulting in a totally consistent response, regardless of the recording environment

In 1982, Sanken introduced the first of the company’s dual capsule microphones, the CU-41, a cardioid condenser microphone which established a new standard for music and voiceover recording. The CU-41’s 2-way capsule provided flat frequency response and distortion-free performance from 20Hz to 20kHz, resulting in a completely natural and uncolored sound. The CU-44X introduced in 1988 was an output-transformerless version of the popular CU-41. The high speed transient characteristics of a transformerless design afforded new degrees of accurate spatial reproduction and colorless sonic transparency. While the CU-44X required a special PSU power supply, the new CU-44X MkII conveniently houses the 48V phantom power supply within the body of the microphone.

The CU-44X MkII’s frequency response is totally flat , not only on axis, but also at 90 degrees, and even at 135 degrees. This capacity is essential in maintaining absolute sonic transparency. The smooth cardioid polar pattern and uniform response over the entire frequency range allows the CU-44X MkII to capture both the designated audio target as well as the naturally reflected sounds, with identical optimum response.

The CU-44X MkII has the desirable characteristics of a transformerless design, achieving superior transient response and vivid sonic imagery. This revolutionary new microphone has a maximum input level of 140dB (1% THD), making it capable of withstanding extremely high sound pressure levels without distortion.

The CU-44X MkII was certified by METAlliance.

Datos Técnicos

Directivity

Cardioid

Transducer

DC biased condenser

Frequency range

20Hz – 30kHz

Sensitivity
(nominal at 1kHz)

20.0mV/Pa(-34dB,0dB=1V/Pa)

Equivalent noise level
(A-weighted)

15dB-A

Max SPL (1% THD)

140dB SPL

Output impedance
at 1KHz

150 ohm

Powering

+48±4V phantom

Current consumption

less than 4mA

Weight

430g

Dimensions

156mm x 45.5mm(diameter)

Surface finish

matte black

Connector

XLR-3M

Preguntas Frecuentes

Description

The CU-44X MkII has a specially-designed 2-way capsule, one for the bass and one for the high frequencies. This unique design with dual titanium diaphragms is a meticulously engineered microphone which produces a completely transparent and high-resolution sound suitable for today’s advanced high sampling digital recordings. The CU-44X MkII also features a unique capsule mounting scheme to ensure phase coherency between the two capsules. The titanium membranes of the CU-44X MkII are immune to the effects of humidity and temperature change, resulting in a totally consistent response, regardless of the recording environment

In 1982, Sanken introduced the first of the company’s dual capsule microphones, the CU-41, a cardioid condenser microphone which established a new standard for music and voiceover recording. The CU-41’s 2-way capsule provided flat frequency response and distortion-free performance from 20Hz to 20kHz, resulting in a completely natural and uncolored sound. The CU-44X introduced in 1988 was an output-transformerless version of the popular CU-41. The high speed transient characteristics of a transformerless design afforded new degrees of accurate spatial reproduction and colorless sonic transparency. While the CU-44X required a special PSU power supply, the new CU-44X MkII conveniently houses the 48V phantom power supply within the body of the microphone.

The CU-44X MkII’s frequency response is totally flat , not only on axis, but also at 90 degrees, and even at 135 degrees. This capacity is essential in maintaining absolute sonic transparency. The smooth cardioid polar pattern and uniform response over the entire frequency range allows the CU-44X MkII to capture both the designated audio target as well as the naturally reflected sounds, with identical optimum response.

The CU-44X MkII has the desirable characteristics of a transformerless design, achieving superior transient response and vivid sonic imagery. This revolutionary new microphone has a maximum input level of 140dB (1% THD), making it capable of withstanding extremely high sound pressure levels without distortion.

The CU-44X MkII was certified by METAlliance.

Technical Specifications

Directivity

Cardioid

Transducer

DC biased condenser

Frequency range

20Hz – 30kHz

Sensitivity
(nominal at 1kHz)

20.0mV/Pa(-34dB,0dB=1V/Pa)

Equivalent noise level
(A-weighted)

15dB-A

Max SPL (1% THD)

140dB SPL

Output impedance
at 1KHz

150 ohm

Powering

+48±4V phantom

Current consumption

less than 4mA

Weight

430g

Dimensions

156mm x 45.5mm(diameter)

Surface finish

matte black

Connector

XLR-3M

FAQ

Descrição

The CU-44X MkII has a specially-designed 2-way capsule, one for the bass and one for the high frequencies. This unique design with dual titanium diaphragms is a meticulously engineered microphone which produces a completely transparent and high-resolution sound suitable for today’s advanced high sampling digital recordings. The CU-44X MkII also features a unique capsule mounting scheme to ensure phase coherency between the two capsules. The titanium membranes of the CU-44X MkII are immune to the effects of humidity and temperature change, resulting in a totally consistent response, regardless of the recording environment

In 1982, Sanken introduced the first of the company’s dual capsule microphones, the CU-41, a cardioid condenser microphone which established a new standard for music and voiceover recording. The CU-41’s 2-way capsule provided flat frequency response and distortion-free performance from 20Hz to 20kHz, resulting in a completely natural and uncolored sound. The CU-44X introduced in 1988 was an output-transformerless version of the popular CU-41. The high speed transient characteristics of a transformerless design afforded new degrees of accurate spatial reproduction and colorless sonic transparency. While the CU-44X required a special PSU power supply, the new CU-44X MkII conveniently houses the 48V phantom power supply within the body of the microphone.

The CU-44X MkII’s frequency response is totally flat , not only on axis, but also at 90 degrees, and even at 135 degrees. This capacity is essential in maintaining absolute sonic transparency. The smooth cardioid polar pattern and uniform response over the entire frequency range allows the CU-44X MkII to capture both the designated audio target as well as the naturally reflected sounds, with identical optimum response.

The CU-44X MkII has the desirable characteristics of a transformerless design, achieving superior transient response and vivid sonic imagery. This revolutionary new microphone has a maximum input level of 140dB (1% THD), making it capable of withstanding extremely high sound pressure levels without distortion.

The CU-44X MkII was certified by METAlliance.

Especificações Técnicas

Directivity

Cardioid

Transducer

DC biased condenser

Frequency range

20Hz – 30kHz

Sensitivity
(nominal at 1kHz)

20.0mV/Pa(-34dB,0dB=1V/Pa)

Equivalent noise level
(A-weighted)

15dB-A

Max SPL (1% THD)

140dB SPL

Output impedance
at 1KHz

150 ohm

Powering

+48±4V phantom

Current consumption

less than 4mA

Weight

430g

Dimensions

156mm x 45.5mm(diameter)

Surface finish

matte black

Connector

XLR-3M

Preguntas Frecuentes

Información adicional

Marca

Valoraciones

No hay valoraciones aún.

Solo los usuarios registrados que hayan comprado este producto pueden hacer una valoración.

Free Divi WordPress Theme, Find new Free Android Games at dlandroid24.com